6024 25 cu. ft. Reach-In CO2 Incubator [details]  [pdf]   Controls Temperature, Relative Humidity and CO2; Infrared Sensor; No Humidity Pan; Automatic Moist Heat Decontamination Cycle; Comes standard on casters and rolls through a typical doorway

6026 25 cu. ft. Reach-in Refrigerated CO2 Incubator [details]  [pdf]   Controls Temperature, Relative Humidity and CO2; Infrared Sensor; No Humidity Pan; Automatic Moist Heat Decontamination Cycle; Comes standard on casters and rolls through a typical doorway

6034 30 cu. ft. Reach-in CO2 Incubator [details]  [pdf]   Controls Temperature, Relative Humidity and CO2

6400 Temperature, Relative Humidity and CO2 [details]  [pdf]   6 cu. ft., 5C Above Ambient to 60C, Elevated up to 95% @ 37C RH, 0 to 20% CO2, 90C Moist Heat Decontamination Cycle

CO₂ Incubators

	Downloads Click here to download product literature

LARGE CAPACITY CO2 INCUBATOR

CARON's large capacity Reach-In CO2 Incubator provides the ideal environment for small to large scale, high volume cell culture.

This 30 cu. ft. unit provides precise control of temperature, relative humidity and CO2, and offers the latest technology in sensors, including infrared (IR) CO2.  Our control and uniformity parameters rival any conventional benchtop incubator, providing maximum culturing space in a minimal footprint (not previously available in a large capacity incubator.)

CARON controls humidity by monitoring and injecting water, eliminating the infamous humidity pans found in other units which result in contamination and corrosion caused by standing water.

Standard Features

• Temperature range of 5°C above ambient to 60°C is controlled with a drift-resistant RTD sensor.
• Humidity is controlled from ambient to 95% RH utilizing a capacitive sensor.  No humidity pan is needed. Water is injected on an as-needed basis to maintain a precisely controlled environment.
• Humidity levels can be controlled at any temperature setpoint without recalibration.
• The CO2 range of 0 to 20% is controlled through the use of an IR (infrared) sensor.  IR CO2 sensors are much more stable and drift resistant than conventional T/C (thermal conductivity) sensors used by other manufacturers.
• The IR CO2 sensor is not affected by temperature or humidity changes, allowing the chamber to recover CO2 levels without waiting on temperature and humidity.  Systems with IR sensors typicaly recover CO2 as much as 10 times faster than those with T/C sensors.
• CARON's carefully designed horizontal airflow system generates evenly distributed airflow across all shelf locations.  Maximum uniformity and rapid recovery are maintained even under heavy cabinet loads.
• Sliding stainless steel shelves are easily adjustable to facilitate handling of your product, and allow easy access to samples at the rear of the chamber.
• Stainless steel interior is easily cleaned and highly resistant to corrosion.
• The ergonomically designed door handle allows easy access into the chamber.
• Heated, triple-pane glass door minimizes condensation on the door for a clear view of your valuable samples, and aids in rapid temperature recovery.
• Lockable control panel minimizes the possibility of unauthorized access.
• Two access ports, one on each side of the chamber, make validation easy and provide you easy access to connect instrumentation.

Set It and Forget It!

CARON's Reach-In CO2 Incubators can be factory pre-programmed with setpoints for temperature, humidity, and CO2.  After final connections are made at your facility, power can be turned on with nothing more to do.  Just set it and forget it!

Product Specifications
CO2 Incubator
Model 6034-1

• For a quick quote on CARON's CO2 Incubators, please click here.
  
• For information on CARON’s Technical Service options, including validation, calibration, extended and preventative maintenance and installation, click here.

Catalog No.	Name	Unit of Issue	Models
ALRM203	Remote Alarm Contacts	Each	6033, 6034
	Remote alarm contacts for Model 6033 and 6034. Provides NO and NC dry contacts for alarms.
COMM101	RS485 Communications Interface	Each	6033, 6034
	RS485 communications interface. Provides a communications interface to the temperature, humidity, and CO2 controllers. Requires SFTW102 or other 3rd party software.
CRSY102	Condensate Recirculator	Each	6010, 6020, 6023, 6024, 6030, 6034, 6105, 6545, 6026
	Condensate recirculating system most commonly used with the chamber when necessary in-house water supply or floor drain is unavailable, or as an attempt to conserve water usage. Collects, filters, and reuses water as the unit calls for humidity.
CRSYKIT	Condensate Circulator Kit	Each	6010, 6020, 6025, 6030, 6034, 6105, 6545, 6026
	Tubing and fitting kit to connect CRSY102 to two chambers.
DOOR507	Door	Each	6033, 6034
	Solid light tight door cover
DOOR601	Lexan Inner Door Kit	Each	6033, 6034
	Lexan inner door kit. Divides the chamber into five equally sized zones. Minimizes chamber interrruption during a door opening.
FLTR101	Filter	Each	6010, 6025, 6030, 6034, 6035, 6105, 6545, 6026
	Filter replacement kit for CRSY102. Includes DI cartridge, carbon filter, and silver stick.
GASG101	Gas Guard	Each	6034
	Built-in CO2 gas guard. Allows two CO2 tanks to be connected to a Model 6034. Automatically switches from the primary to the secondary tank when low gas pressure is detected.
GASG201	Gas Guard	Each	6034
	Stand alone gas guard/tank switcher system.
INSTALLATION	Installation	Each	6010, 6011, 6012, 6030, 6031, 6032, 6033, 6034
	Installation & start-up. Facility must already be equipped with electrical and plumbing requirements.
LOCK101	Outer Door Lock	Each	6021, 6022, 6025, 6033, 6034
	Outer door lock
OUTP101	Analog Outputs	Each	6033, 6034
	0-5V Analog Outputs. Provides connections for monitoring of the displayed control values.
OUTP102	Analog Outputs	Each	6033, 6034
	4-20mA Analog Outputs. Provides connections for monitoring of the displayed control values.
RCDR103	Recorder	Each	6030, 6034, 6545
	Temperature/humidity recorder. Honeywell, 2 pen, 7 day, 10" circular chart.
RCDR203	Recorder	Each	6034, 6540
	Circular, 12", Honeywell Truline Chart Recorder. Records and charts three variables.
REGL101	CO2 Regular	Each	6034, 6026, 6024
	CO2 tank regulator. Two stage with input range of 0-2000 psi and output range of 0-30 psi. Dual pressure gauges with barbed hose connection. Equipped with a rotary shutoff valve.
SFTW102	Software	Each	6030, 6031, 6032, 6033, 6034
	Windows-based Watlow communications software for data logging.
SHKR101	Shaker Support System	Each	6030, 6034
	Stainles Steel Triple-Tier Shaker Support System. Capable of supporting up to three 150 lb. shakers operating at 150 RPM each. 19" clearance between shelves. Complete with two 115V GFI duplex outlets. Standard leveling feet on chambers are replaced with vibration isolation pads when ordering this option.
SHLF123	Shelf	Each	6033, 6034
	Additional 6033/34 series sliding stainless steel, perforated shelf. Includes two shelf tracks.
SHLF124	Shelf	Each	6033, 6034
	Additional 6033/34 series sliding stainless steel, wire rod shelf. Includes two shelf tracks.